產品名稱:10KV微型高壓聲光驗電器
產品型號:
產品特點:10KV微型高壓聲光驗電器它具有驗電靈敏(min)度高、不受強電場干擾、具備全電路自檢功能、待機時間長、使高壓驗電器使用安全可靠。產品設計先進,結構合理,性能完善可靠,使用,是當前國內外電力行業更新換代的理想產品,是發電廠、變電所、工礦電氣部門*的安全工器具。
10KV微型高壓聲光驗電器的詳細資料:
10KV微型高壓聲光驗電器是一種攜帶方便、重量輕、驗電方便的新型驗電器。適用于額定頻率為50HZ,電壓等級為10KV、35KV、110KV、220KV的交流電壓,作直接接觸式驗電用。是我公司開發設計的新一代電容型高壓驗電器,它具有驗電靈敏度高、不受強電場干擾、具備全電路自檢功能、待機時間長、使高壓驗電器使用安全可靠。產品設計先進,結構合理,性能完善可靠,使用,是當前國內外電力行業更新換代的理想產品,是發電廠、變電所、工礦電氣部門*的安全工器具。
語言交流驗電器適用于發電、輸電、變電系統和工礦企業的電器操作檢修人員用于驗證有無電壓的理想安全工具使用環境溫度為-25-55;相對濕度為20%~96%,使用場合為戶內和戶外良好天氣.指示器工作電源為四節SR44(AG13)紐扣電池,靜態電流<=10Ua,測電壽命>=5000次。
10KV微型高壓聲光驗電器一、語言交流驗電器聲光訊號指示強度:報警發聲指示強度(1m處70Dd,25m處可聞),超高亮度紅色閃光指示強度(紅色閃光,15m外直接光照可見).
二、驗電器始終處于備用狀態,當電池電壓降低不足時,本指示器聲光訊號微弱,即應更換電池.驗電器接觸及電極上突然接觸電壓時起至指示器清晰無線電臺示之間的延遲時間(即響應時間)<=1秒,返回系數>=0.95驗電器具有很高的抗干擾性能,防短接能力,防電火花性能和辨別直流高壓性能(對直流無反應,只是接觸時短促響一聲)。
語言交流驗電器使用方法及注意事項
1、使用前應根據被除數測線路調和的額定電壓選用合適瑾的指示器和操作桿。
2、驗電操作前應先對指示器進行自檢實驗,才能將指示器旋轉固定在操作桿(絕緣桿)上,并將絕緣桿拉伸至規定長度,(以節數順序編號全部依次露出為準)再作一次自栓后才能進行驗電操作。
3、自檢測功能:本驗電器電路處連續監控狀態,只要一按自檢測按鈕,如聲光訊號正常,就具有全電路自檢測功能,即證明驗電器指示器處于正常臨近狀態,可進行驗電操作。
4、主要技術指標驗電器(指示器)如遇損壞,切勿擅自處理,請及時與我廠聯系維修調換,只要不是人為而是驗電器本身質量總是造成的故障,3個月內可予免費更換。
語言交流驗電器定期試驗
a、為保證人身和設備的安全,根據【電業安全工作規程】規定電器每裝卸應進行一次預防性試驗。
b、預防性試驗前,應進行外觀檢查。當發現驗電指示器的外殼有缺損,絕緣桿有裂紋等明顯缺陷時不宜進行預防性試驗,應及時送交更換。
技術參數
(1)6KV高壓驗電器
有效絕緣長度:840mm 手柄長度:120mm 節數:5 護環直徑:55mm 接觸電極長度:40mm
(2)10KV高壓驗電器
有效絕緣長度:840mm 手柄長度:120mm 節數:5 護環直徑:55mm 接觸電極長度:40mm
(3)35KV高壓驗電器
有效絕緣長度:1870mm 手柄長度:120mm 節數:5 護環直徑:57mm 接觸電極長度:50mm
(4)高壓驗電器
適用電壓等級:110KV 回態長度60cm 伸態長度200cm
(5)220KV高壓驗電器
適用電壓等級:220KV 回態長度80cm 伸態長度300cm
(6)500KV高壓驗電器
適用電壓等級:500KV 回態長度160cm 伸態長度720c
注意事項
使用驗電器時必須注意其額定電壓和被檢驗電氣設備的電壓等級相適應,否則可能會危及驗電操作人員的人身安全或造成誤判斷。驗電時操作人員應戴絕緣手套,手握在罩護環以下的握手部位,先在有電設備上進行檢驗,檢驗時應漸漸將驗電器移近帶電設備至發光或發聲時止,以確認驗電器性能完好,有自檢系統的驗電器應先撳動自檢鈕確認驗電器完好,然后再在需要進行驗電的設備上檢測,檢測時也應漸漸將驗電器移近待測設備,直至觸及設備導電部位,此過程若一直無聲、光指示,則可判定該設備不帶電,反之,如在移近過程中突然發光或發聲,即認為該設備帶電,即可停止移近,結束驗電。 另外,風車型驗電器只適用于戶內或戶外良好天氣下使用,凡雨、雪等環境條件下,禁止使用。
如果你對10KV微型高壓聲光驗電器感興趣,想了解更詳細的產品信息,填寫下表直接與廠家聯系: |
上一篇:微型高壓交流聲光驗電器
下一篇:高壓語音驗電器